My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Text excerpt from page 164 (click to view)
Chapter 13: Using the Effects
6. Press the [MASTER] key and adjust the Send Master 1 level. Leave the level to 100 (default). Fine-adjust the level later while playing the DPS16.
7. Set the FX1�s Bus parameter to �ON�. Now the signal output from the FX1 (the reverb sound in this example) is sent to the ping-pong bus and mixed with the original dry sound from the TRACK MIX channels.
8. Adjust the Effect Return 1 level in the same screen. The Effect Return 1 parameter determines the return level (the level of signal sent from FX1 to the ping-pong bus). Leave the level to 100 (default). Fine-adjust the level later while playing the DPS16.
ºNOTE : The Bus and Effect Return 1�4 parameters on this screen are the same as the Bus and
fields on the Effect screen.
Level
9. Assign the ping-pong bus L/R signals to tracks 15 and 16 in Quick Patch mode. The original dry sound from TRACK MIX channels 1�8 is mixed with the FX1�s effect sound in the pingpong bus, then sent to tracks 15 and 16.
<ex. Ping-pong bus L/R signals are assigned to tracks 15 and 16.>