|
Who's Online
There currently are 5933 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
;
Last week I bought a second hand Panasonic AG-7500 SVHS Hi-Fi Video Cassette Recorder. It is a professional machine with many video and audio options. I feared it would be a huge quest to find a manual. I was delighted when I found owner-manuals.com. After payment I received the file to download the next day already. The quality is great. I am very happy. Thanks!
Chapter 13: Using the effects
iTIP : If you selected Global effects for both EFFECT A and B, you may want to select
STEREO
1 MIXED
or 2 STEREO PAIRS If you have selected Insert effects for either EFFECT A or B or PAIRS. both, you may want to select 2 STEREO PAIRS PAIRS.
Routing effect return signals to THRU MIX channels
You can send effect return signals that have been switched as analog input signals to the THRU MIX channels in the mixer section to mix them with the TRACK MIX channel signals (track playback). Follow the steps below to send the effect return signals to the mixer section. 1. Press the THRU [F2] key in Assign mode. 2. Select the analog inputs to which the effect return signals are routed, and select as their destination.
THRU MIX
Example: If you selected
2 STEREO PAIRS in Assign FXB RTN-L FXB RTN-R to THRU MIX RTN-L, RTN-R, MIX.
mode, route
FXA RTN-L FXA RTN-R RTN-L, RTN-R,
Setting the effect send level
You may set the AUX send level of the TRACK MIX channels to which you wish to apply effects in Mixer mode. The operation will differ slightly depending on whether you selected Global effects or Insert effects.
s If you selected Global effects
1. Select TRACK MIX channels in Mixer mode, and adjust the AUX SEND-A or AUX SEND-B level of the channel to which you wish to apply effects. AUX SEND A signal is sent to EFFECT A, and AUX SEND B signal is sent to EFFECT B. At this time, you can check the output level of AUX SENDs A/B using level meters SA/B. If the level is too high, adjust it using the channel SEND MASTER and AUX SEND-A/B parameters.
1
You can check the output level of AUX SEND A/B using the meter 1. 2. Recall the AUX-A PRE/POST and AUX-B PRE/POST parameters to select whether the signals sent to EFFECT A/B are routed from the pre-fader or post fader.
132
|
|
|
> |
|